1) Click Here. Click the UOTrace program link to download the program.
2) Unzip the 2 files anywhere you want.
3) Launch the UOTrace program.
4) A dialog will appear asking if you want to retrieve the shard list. Press No (this function no longer works).
5) The following window will appear.

6) Press the "Trace Route" button near the middle at the top. It will take up to a minute for it to be fully completed. When it has you will see the words "Traceroute Successful" at the bottom left.
7) Press the "Poll" button on the right next to the colored UO-Homepage button. It will now send packets to all servers in your route and determine if any are having issues. You should send around 100 packets to get an accurate reading. Press the "Poll" button again (it now says "Stop Poll") to end polling.
Now you have all the data necessary to determine if you have an issue. If you have anything besides 0% all the way down in the "% loss" column there is probably an issue. Any number above 1% is not normal. I can give you advice on what to do next, either PM me (if you want to keep your IP address private) or post your trace route data here (go to edit and copy, then paste between using the PRE bbCode tags..